feat(waybar): delete autohide dock

btop/btop.conf

@@ -0,0 +1,272 @@
+#? Config file for btop v.1.4.6
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "/home/stereov/.config/btop/themes/catppuccin-mocha.theme"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = false
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "mem net proc cpu"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

btop/themes/catppuccin-mocha.theme

@@ -0,0 +1,83 @@
+# Main background, empty for terminal default, need to be empty if you want transparent background
+theme[main_bg]="#1e1e2e"
+
+# Main text color
+theme[main_fg]="#cdd6f4"
+
+# Title color for boxes
+theme[title]="#cdd6f4"
+
+# Highlight color for keyboard shortcuts
+theme[hi_fg]="#89b4fa"
+
+# Background color of selected item in processes box
+theme[selected_bg]="#45475a"
+
+# Foreground color of selected item in processes box
+theme[selected_fg]="#89b4fa"
+
+# Color of inactive/disabled text
+theme[inactive_fg]="#7f849c"
+
+# Color of text appearing on top of graphs, i.e uptime and current network graph scaling
+theme[graph_text]="#f5e0dc"
+
+# Background color of the percentage meters
+theme[meter_bg]="#45475a"
+
+# Misc colors for processes box including mini cpu graphs, details memory graph and details status text
+theme[proc_misc]="#f5e0dc"
+
+# CPU, Memory, Network, Proc box outline colors
+theme[cpu_box]="#cba6f7" #Mauve
+theme[mem_box]="#a6e3a1" #Green
+theme[net_box]="#eba0ac" #Maroon
+theme[proc_box]="#89b4fa" #Blue
+
+# Box divider line and small boxes line color
+theme[div_line]="#6c7086"
+
+# Temperature graph color (Green -> Yellow -> Red)
+theme[temp_start]="#a6e3a1"
+theme[temp_mid]="#f9e2af"
+theme[temp_end]="#f38ba8"
+
+# CPU graph colors (Teal -> Lavender)
+theme[cpu_start]="#94e2d5"
+theme[cpu_mid]="#74c7ec"
+theme[cpu_end]="#b4befe"
+
+# Mem/Disk free meter (Mauve -> Lavender -> Blue)
+theme[free_start]="#cba6f7"
+theme[free_mid]="#b4befe"
+theme[free_end]="#89b4fa"
+
+# Mem/Disk cached meter (Sapphire -> Lavender)
+theme[cached_start]="#74c7ec"
+theme[cached_mid]="#89b4fa"
+theme[cached_end]="#b4befe"
+
+# Mem/Disk available meter (Peach -> Red)
+theme[available_start]="#fab387"
+theme[available_mid]="#eba0ac"
+theme[available_end]="#f38ba8"
+
+# Mem/Disk used meter (Green -> Sky)
+theme[used_start]="#a6e3a1"
+theme[used_mid]="#94e2d5"
+theme[used_end]="#89dceb"
+
+# Download graph colors (Peach -> Red)
+theme[download_start]="#fab387"
+theme[download_mid]="#eba0ac"
+theme[download_end]="#f38ba8"
+
+# Upload graph colors (Green -> Sky)
+theme[upload_start]="#a6e3a1"
+theme[upload_mid]="#94e2d5"
+theme[upload_end]="#89dceb"
+
+# Process box color gradient for threads, mem and cpu usage (Sapphire -> Mauve)
+theme[process_start]="#74c7ec"
+theme[process_mid]="#b4befe"
+theme[process_end]="#cba6f7"

fish/completions/fisher.fish

@@ -0,0 +1,7 @@
+complete --command fisher --exclusive --long help --description "Print help"
+complete --command fisher --exclusive --long version --description "Print version"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments install --description "Install plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments update --description "Update installed plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments remove --description "Remove installed plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments list --description "List installed plugins matching regex"
+complete --command fisher --exclusive --condition "__fish_seen_subcommand_from update remove" --arguments "(fisher list)"

fish/completions/fzf_configure_bindings.fish

@@ -0,0 +1,8 @@
+complete fzf_configure_bindings --no-files
+complete fzf_configure_bindings --long help --short h --description "Print help" --condition "not __fish_seen_argument --help -h"
+complete fzf_configure_bindings --long directory --description "Change the key binding for Search Directory" --condition "not __fish_seen_argument --directory"
+complete fzf_configure_bindings --long git_log --description "Change the key binding for Search Git Log" --condition "not __fish_seen_argument --git_log"
+complete fzf_configure_bindings --long git_status --description "Change the key binding for Search Git Status" --condition "not __fish_seen_argument --git_status"
+complete fzf_configure_bindings --long history --description "Change the key binding for Search History" --condition "not __fish_seen_argument --history"
+complete fzf_configure_bindings --long processes --description "Change the key binding for Search Processes" --condition "not __fish_seen_argument --processes"
+complete fzf_configure_bindings --long variables --description "Change the key binding for Search Variables" --condition "not __fish_seen_argument --variables"

fish/config.fish

@@ -18,6 +18,10 @@ set -x STARSHIP_CONFIG $HOME/.config/starship/starship.toml
 # Set default kubectl editor
 set -x KUBE_EDITOR nvim
 
+if not set -q SSH_AUTH_SOCK
+    eval (ssh-agent -c) >/dev/null
+end
+
 # Docker
 alias dc="docker compose"
 alias dl="docker logs"

fish/fish_plugins

@@ -1 +1,3 @@
 patrickf1/fzf.fish
+jorgebucaran/fisher
+reitzig/sdkman-for-fish@v2.1.0

fish/functions/_fzf_configure_bindings_help.fish

@@ -0,0 +1,43 @@
+function _fzf_configure_bindings_help --description "Prints the help message for fzf_configure_bindings."
+    echo "\
+USAGE:
+    fzf_configure_bindings [--COMMAND=[KEY_SEQUENCE]...]
+
+DESCRIPTION
+    fzf_configure_bindings installs key bindings for fzf.fish's commands and erases any bindings it
+    previously installed. It installs bindings for both default and insert modes. fzf.fish executes
+    it without options on fish startup to install the out-of-the-box key bindings.
+
+    By default, commands are bound to a mnemonic key sequence, shown below. Each command's binding
+    can be configured using a namesake corresponding option:
+        COMMAND            |  DEFAULT KEY SEQUENCE         |  CORRESPONDING OPTION
+        Search Directory   |  Ctrl+Alt+F (F for file)      |  --directory
+        Search Git Log     |  Ctrl+Alt+L (L for log)       |  --git_log
+        Search Git Status  |  Ctrl+Alt+S (S for status)    |  --git_status
+        Search History     |  Ctrl+R     (R for reverse)   |  --history
+        Search Processes   |  Ctrl+Alt+P (P for process)   |  --processes
+        Search Variables   |  Ctrl+V     (V for variable)  |  --variables
+    Override a command's binding by specifying its corresponding option with the desired key
+    sequence. Disable a command's binding by specifying its corresponding option with no value.
+
+    Because fzf_configure_bindings erases bindings it previously installed, it can be cleanly
+    executed multiple times. Once the desired fzf_configure_bindings command has been found, add it
+    to your config.fish in order to persist the customized bindings.
+
+    In terms of validation, fzf_configure_bindings fails if passed unknown options. It expects an
+    equals sign between an option's name and value. However, it does not validate key sequences.
+
+    Pass -h or --help to print this help message and exit.
+
+EXAMPLES
+    Default bindings but bind Search Directory to Ctrl+F and Search Variables to Ctrl+Alt+V
+        \$ fzf_configure_bindings --directory=\cf --variables=\e\cv
+    Default bindings but disable Search History
+        \$ fzf_configure_bindings --history=
+    An agglomeration of different options
+        \$ fzf_configure_bindings --git_status=\cg --history=\ch --variables= --processes=
+
+SEE Also
+    To learn more about fish key bindings, see bind(1) and fish_key_reader(1).
+"
+end

fish/functions/_fzf_extract_var_info.fish

@@ -0,0 +1,15 @@
+# helper function for _fzf_search_variables
+function _fzf_extract_var_info --argument-names variable_name set_show_output --description "Extract and reformat lines pertaining to \$variable_name from \$set_show_output."
+    # Extract only the lines about the variable, all of which begin with either
+    # $variable_name: ...or... $variable_name[
+    string match --regex "^\\\$$variable_name(?::|\[).*" <$set_show_output |
+
+        # Strip the variable name prefix, including ": " for scope info lines
+        string replace --regex "^\\\$$variable_name(?:: )?" '' |
+
+        # Distill the lines of values, replacing...
+        #   [1]: |value|
+        # ...with...
+        #   [1] value
+        string replace --regex ": \|(.*)\|" ' $1'
+end

fish/functions/_fzf_preview_changed_file.fish

@@ -0,0 +1,49 @@
+# helper for _fzf_search_git_status
+# arg should be a line from git status --short, e.g.
+# MM functions/_fzf_preview_changed_file.fish
+#  D README.md
+# R  LICENSE -> "New License"
+function _fzf_preview_changed_file --argument-names path_status --description "Show the git diff of the given file."
+    # remove quotes because they'll be interpreted literally by git diff
+    # no need to requote when referencing $path because fish does not perform word splitting
+    # https://fishshell.com/docs/current/fish_for_bash_users.html
+    set -f path (string unescape (string sub --start 4 $path_status))
+    # first letter of short format shows index, second letter shows working tree
+    # https://git-scm.com/docs/git-status/2.35.0#_short_format
+    set -f index_status (string sub --length 1 $path_status)
+    set -f working_tree_status (string sub --start 2 --length 1 $path_status)
+
+    set -f diff_opts --color=always
+
+    if test $index_status = '?'
+        _fzf_report_diff_type Untracked
+        _fzf_preview_file $path
+    else if contains {$index_status}$working_tree_status DD AU UD UA DU AA UU
+        # Unmerged statuses taken directly from git status help's short format table
+        # Unmerged statuses are mutually exclusive with other statuses, so if we see
+        # these, then safe to assume the path is unmerged
+        _fzf_report_diff_type Unmerged
+        git diff $diff_opts -- $path
+    else
+        if test $index_status != ' '
+            _fzf_report_diff_type Staged
+
+            # renames are only detected in the index, never working tree, so only need to test for it here
+            # https://stackoverflow.com/questions/73954214
+            if test $index_status = R
+                # diff the post-rename path with the original path, otherwise the diff will show the entire file as being added
+                set -f orig_and_new_path (string split --max 1 -- ' -> ' $path)
+                git diff --staged $diff_opts -- $orig_and_new_path[1] $orig_and_new_path[2]
+                # path currently has the form of "original -> current", so we need to correct it before it's used below
+                set path $orig_and_new_path[2]
+            else
+                git diff --staged $diff_opts -- $path
+            end
+        end
+
+        if test $working_tree_status != ' '
+            _fzf_report_diff_type Unstaged
+            git diff $diff_opts -- $path
+        end
+    end
+end

fish/functions/_fzf_preview_file.fish

@@ -0,0 +1,43 @@
+# helper function for _fzf_search_directory and _fzf_search_git_status
+function _fzf_preview_file --description "Print a preview for the given file based on its file type."
+    # because there's no way to guarantee that _fzf_search_directory passes the path to _fzf_preview_file
+    # as one argument, we collect all the arguments into one single variable and treat that as the path
+    set -f file_path $argv
+
+    if test -L "$file_path" # symlink
+        # notify user and recurse on the target of the symlink, which can be any of these file types
+        set -l target_path (realpath "$file_path")
+
+        set_color yellow
+        echo "'$file_path' is a symlink to '$target_path'."
+        set_color normal
+
+        _fzf_preview_file "$target_path"
+    else if test -f "$file_path" # regular file
+        if set --query fzf_preview_file_cmd
+            # need to escape quotes to make sure eval receives file_path as a single arg
+            eval "$fzf_preview_file_cmd '$file_path'"
+        else
+            bat --style=numbers --color=always "$file_path"
+        end
+    else if test -d "$file_path" # directory
+        if set --query fzf_preview_dir_cmd
+            # see above
+            eval "$fzf_preview_dir_cmd '$file_path'"
+        else
+            # -A list hidden files as well, except for . and ..
+            # -F helps classify files by appending symbols after the file name
+            command ls -A -F "$file_path"
+        end
+    else if test -c "$file_path"
+        _fzf_report_file_type "$file_path" "character device file"
+    else if test -b "$file_path"
+        _fzf_report_file_type "$file_path" "block device file"
+    else if test -S "$file_path"
+        _fzf_report_file_type "$file_path" socket
+    else if test -p "$file_path"
+        _fzf_report_file_type "$file_path" "named pipe"
+    else
+        echo "$file_path doesn't exist." >&2
+    end
+end

fish/functions/_fzf_report_diff_type.fish

@@ -0,0 +1,18 @@
+# helper for _fzf_preview_changed_file
+# prints out something like
+# ╭────────╮
+# │ Staged │
+# ╰────────╯
+function _fzf_report_diff_type --argument-names diff_type --description "Print a distinct colored header meant to preface a git patch."
+    # number of "-" to draw is the length of the string to box + 2 for padding
+    set -f repeat_count (math 2 + (string length $diff_type))
+    set -f line (string repeat --count $repeat_count ─)
+    set -f top_border ╭$line╮
+    set -f btm_border ╰$line╯
+
+    set_color yellow
+    echo $top_border
+    echo "│ $diff_type │"
+    echo $btm_border
+    set_color normal
+end

fish/functions/_fzf_report_file_type.fish

@@ -0,0 +1,6 @@
+# helper function for _fzf_preview_file
+function _fzf_report_file_type --argument-names file_path file_type --description "Explain the file type for a file."
+    set_color red
+    echo "Cannot preview '$file_path': it is a $file_type."
+    set_color normal
+end

fish/functions/_fzf_search_directory.fish

@@ -0,0 +1,33 @@
+function _fzf_search_directory --description "Search the current directory. Replace the current token with the selected file paths."
+    # Directly use fd binary to avoid output buffering delay caused by a fd alias, if any.
+    # Debian-based distros install fd as fdfind and the fd package is something else, so
+    # check for fdfind first. Fall back to "fd" for a clear error message.
+    set -f fd_cmd (command -v fdfind || command -v fd  || echo "fd")
+    set -f --append fd_cmd --color=always $fzf_fd_opts
+
+    set -f fzf_arguments --multi --ansi $fzf_directory_opts
+    set -f token (commandline --current-token)
+    # expand any variables or leading tilde (~) in the token
+    set -f expanded_token (eval echo -- $token)
+    # unescape token because it's already quoted so backslashes will mess up the path
+    set -f unescaped_exp_token (string unescape -- $expanded_token)
+
+    # If the current token is a directory and has a trailing slash,
+    # then use it as fd's base directory.
+    if string match --quiet -- "*/" $unescaped_exp_token && test -d "$unescaped_exp_token"
+        set --append fd_cmd --base-directory=$unescaped_exp_token
+        # use the directory name as fzf's prompt to indicate the search is limited to that directory
+        set --prepend fzf_arguments --prompt="Directory $unescaped_exp_token> " --preview="_fzf_preview_file $expanded_token{}"
+        set -f file_paths_selected $unescaped_exp_token($fd_cmd 2>/dev/null | _fzf_wrapper $fzf_arguments)
+    else
+        set --prepend fzf_arguments --prompt="Directory> " --query="$unescaped_exp_token" --preview='_fzf_preview_file {}'
+        set -f file_paths_selected ($fd_cmd 2>/dev/null | _fzf_wrapper $fzf_arguments)
+    end
+
+
+    if test $status -eq 0
+        commandline --current-token --replace -- (string escape -- $file_paths_selected | string join ' ')
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_search_git_log.fish

@@ -0,0 +1,36 @@
+function _fzf_search_git_log --description "Search the output of git log and preview commits. Replace the current token with the selected commit hash."
+    if not git rev-parse --git-dir >/dev/null 2>&1
+        echo '_fzf_search_git_log: Not in a git repository.' >&2
+    else
+        if not set --query fzf_git_log_format
+            # %h gives you the abbreviated commit hash, which is useful for saving screen space, but we will have to expand it later below
+            set -f fzf_git_log_format '%C(bold blue)%h%C(reset) - %C(cyan)%ad%C(reset) %C(yellow)%d%C(reset) %C(normal)%s%C(reset)  %C(dim normal)[%an]%C(reset)'
+        end
+
+        set -f preview_cmd 'git show --color=always --stat --patch {1}'
+        if set --query fzf_diff_highlighter
+            set preview_cmd "$preview_cmd | $fzf_diff_highlighter"
+        end
+
+        set -f selected_log_lines (
+            git log --no-show-signature --color=always --format=format:$fzf_git_log_format --date=short | \
+            _fzf_wrapper --ansi \
+                --multi \
+                --scheme=history \
+                --prompt="Git Log> " \
+                --preview=$preview_cmd \
+                --query=(commandline --current-token) \
+                $fzf_git_log_opts
+        )
+        if test $status -eq 0
+            for line in $selected_log_lines
+                set -f abbreviated_commit_hash (string split --field 1 " " $line)
+                set -f full_commit_hash (git rev-parse $abbreviated_commit_hash)
+                set -f --append commit_hashes $full_commit_hash
+            end
+            commandline --current-token --replace (string join ' ' $commit_hashes)
+        end
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_search_git_status.fish

@@ -0,0 +1,41 @@
+function _fzf_search_git_status --description "Search the output of git status. Replace the current token with the selected file paths."
+    if not git rev-parse --git-dir >/dev/null 2>&1
+        echo '_fzf_search_git_status: Not in a git repository.' >&2
+    else
+        set -f preview_cmd '_fzf_preview_changed_file {}'
+        if set --query fzf_diff_highlighter
+            set preview_cmd "$preview_cmd | $fzf_diff_highlighter"
+        end
+
+        set -f selected_paths (
+            # Pass configuration color.status=always to force status to use colors even though output is sent to a pipe
+            git -c color.status=always status --short |
+            _fzf_wrapper --ansi \
+                --multi \
+                --prompt="Git Status> " \
+                --query=(commandline --current-token) \
+                --preview=$preview_cmd \
+                --nth="2.." \
+                $fzf_git_status_opts
+        )
+        if test $status -eq 0
+            # git status --short automatically escapes the paths of most files for us so not going to bother trying to handle
+            # the few edges cases of weird file names that should be extremely rare (e.g. "this;needs;escaping")
+            set -f cleaned_paths
+
+            for path in $selected_paths
+                if test (string sub --length 1 $path) = R
+                    # path has been renamed and looks like "R LICENSE -> LICENSE.md"
+                    # extract the path to use from after the arrow
+                    set --append cleaned_paths (string split -- "-> " $path)[-1]
+                else
+                    set --append cleaned_paths (string sub --start=4 $path)
+                end
+            end
+
+            commandline --current-token --replace -- (string join ' ' $cleaned_paths)
+        end
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_search_history.fish

@@ -0,0 +1,39 @@
+function _fzf_search_history --description "Search command history. Replace the command line with the selected command."
+    # history merge incorporates history changes from other fish sessions
+    # it errors out if called in private mode
+    if test -z "$fish_private_mode"
+        builtin history merge
+    end
+
+    if not set --query fzf_history_time_format
+        # Reference https://devhints.io/strftime to understand strftime format symbols
+        set -f fzf_history_time_format "%m-%d %H:%M:%S"
+    end
+
+    # Delinate time from command in history entries using the vertical box drawing char (U+2502).
+    # Then, to get raw command from history entries, delete everything up to it. The ? on regex is
+    # necessary to make regex non-greedy so it won't match into commands containing the char.
+    set -f time_prefix_regex '^.*? │ '
+    # Delinate commands throughout pipeline using null rather than newlines because commands can be multi-line
+    set -f commands_selected (
+        builtin history --null --show-time="$fzf_history_time_format │ " |
+        _fzf_wrapper --read0 \
+            --print0 \
+            --multi \
+            --scheme=history \
+            --prompt="History> " \
+            --query=(commandline) \
+            --preview="string replace --regex '$time_prefix_regex' '' -- {} | fish_indent --ansi" \
+            --preview-window="bottom:3:wrap" \
+            $fzf_history_opts |
+        string split0 |
+        # remove timestamps from commands selected
+        string replace --regex $time_prefix_regex ''
+    )
+
+    if test $status -eq 0
+        commandline --replace -- $commands_selected
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_search_processes.fish

@@ -0,0 +1,32 @@
+function _fzf_search_processes --description "Search all running processes. Replace the current token with the pid of the selected process."
+    # Directly use ps command because it is often aliased to a different command entirely
+    # or with options that dirty the search results and preview output
+    set -f ps_cmd (command -v ps || echo "ps")
+    # use all caps to be consistent with ps default format
+    # snake_case because ps doesn't seem to allow spaces in the field names
+    set -f ps_preview_fmt (string join ',' 'pid' 'ppid=PARENT' 'user' '%cpu' 'rss=RSS_IN_KB' 'start=START_TIME' 'command')
+    set -f processes_selected (
+        $ps_cmd -A -opid,command | \
+        _fzf_wrapper --multi \
+                    --prompt="Processes> " \
+                    --query (commandline --current-token) \
+                    --ansi \
+                    # first line outputted by ps is a header, so we need to mark it as so
+                    --header-lines=1 \
+                    # ps uses exit code 1 if the process was not found, in which case show an message explaining so
+                    --preview="$ps_cmd -o '$ps_preview_fmt' -p {1} || echo 'Cannot preview {1} because it exited.'" \
+                    --preview-window="bottom:4:wrap" \
+                    $fzf_processes_opts
+    )
+
+    if test $status -eq 0
+        for process in $processes_selected
+            set -f --append pids_selected (string split --no-empty --field=1 -- " " $process)
+        end
+
+        # string join to replace the newlines outputted by string split with spaces
+        commandline --current-token --replace -- (string join ' ' $pids_selected)
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_search_variables.fish

@@ -0,0 +1,47 @@
+# This function expects the following two arguments:
+# argument 1 = output of (set --show | psub), i.e. a file with the scope info and values of all variables
+# argument 2 = output of (set --names | psub), i.e. a file with all variable names
+function _fzf_search_variables --argument-names set_show_output set_names_output --description "Search and preview shell variables. Replace the current token with the selected variable."
+    if test -z "$set_names_output"
+        printf '%s\n' '_fzf_search_variables requires 2 arguments.' >&2
+
+        commandline --function repaint
+        return 22 # 22 means invalid argument in POSIX
+    end
+
+    # Exclude the history variable from being piped into fzf because
+    # 1. it's not included in $set_names_output
+    # 2. it tends to be a very large value => increases computation time
+    # 3._fzf_search_history is a much better way to examine history anyway
+    set -f all_variable_names (string match --invert history <$set_names_output)
+
+    set -f current_token (commandline --current-token)
+    # Use the current token to pre-populate fzf's query. If the current token begins
+    # with a $, remove it from the query so that it will better match the variable names
+    set -f cleaned_curr_token (string replace -- '$' '' $current_token)
+
+    set -f variable_names_selected (
+        printf '%s\n' $all_variable_names |
+        _fzf_wrapper --preview "_fzf_extract_var_info {} $set_show_output" \
+            --prompt="Variables> " \
+            --preview-window="wrap" \
+            --multi \
+            --query=$cleaned_curr_token \
+            $fzf_variables_opts
+    )
+
+    if test $status -eq 0
+        # If the current token begins with a $, do not overwrite the $ when
+        # replacing the current token with the selected variable.
+        # Uses brace expansion to prepend $ to each variable name.
+        commandline --current-token --replace (
+            if string match --quiet -- '$*' $current_token
+                string join " " \${$variable_names_selected}
+            else
+                string join " " $variable_names_selected
+            end
+        )
+    end
+
+    commandline --function repaint
+end

fish/functions/_fzf_wrapper.fish

@@ -0,0 +1,21 @@
+function _fzf_wrapper --description "Prepares some environment variables before executing fzf."
+    # Make sure fzf uses fish to execute preview commands, some of which
+    # are autoloaded fish functions so don't exist in other shells.
+    # Use --function so that it doesn't clobber SHELL outside this function.
+    set -f --export SHELL (command --search fish)
+
+    # If neither FZF_DEFAULT_OPTS nor FZF_DEFAULT_OPTS_FILE are set, then set some sane defaults.
+    # See https://github.com/junegunn/fzf#environment-variables
+    set --query FZF_DEFAULT_OPTS FZF_DEFAULT_OPTS_FILE
+    if test $status -eq 2
+        # cycle allows jumping between the first and last results, making scrolling faster
+        # layout=reverse lists results top to bottom, mimicking the familiar layouts of git log, history, and env
+        # border shows where the fzf window begins and ends
+        # height=90% leaves space to see the current command and some scrollback, maintaining context of work
+        # preview-window=wrap wraps long lines in the preview window, making reading easier
+        # marker=* makes the multi-select marker more distinguishable from the pointer (since both default to >)
+        set --export FZF_DEFAULT_OPTS '--cycle --layout=reverse --border --height=90% --preview-window=wrap --marker="*"'
+    end
+
+    fzf $argv
+end

fish/functions/fisher.fish

@@ -0,0 +1,251 @@
+function fisher --argument-names cmd --description "A plugin manager for Fish"
+    set --query fisher_path || set --local fisher_path $__fish_config_dir
+    set --local fisher_version 4.4.8
+    set --local fish_plugins $__fish_config_dir/fish_plugins
+
+    switch "$cmd"
+        case -v --version
+            echo "fisher, version $fisher_version"
+        case "" -h --help
+            echo "Usage: fisher install   <plugins...>  Install plugins"
+            echo "       fisher remove    <plugins...>  Remove installed plugins" 
+            echo "       fisher uninstall <plugins...>  Remove installed plugins (alias)" 
+            echo "       fisher update    <plugins...>  Update installed plugins"
+            echo "       fisher update                  Update all installed plugins"
+            echo "       fisher list    [<regex>]       List installed plugins matching regex"
+            echo "Options:"
+            echo "       -v, --version  Print version"
+            echo "       -h, --help     Print this help message"
+            echo "Variables:"
+            echo "       \$fisher_path  Plugin installation path. Default: $__fish_config_dir" | string replace --regex -- $HOME \~
+        case ls list
+            string match --entire --regex -- "$argv[2]" $_fisher_plugins
+        case install update remove uninstall
+            isatty || read --local --null --array stdin && set --append argv $stdin
+
+            test "$cmd" = uninstall && set cmd remove
+
+            set --local install_plugins
+            set --local update_plugins
+            set --local remove_plugins
+            set --local arg_plugins $argv[2..-1]
+            set --local old_plugins $_fisher_plugins
+            set --local new_plugins
+
+            test -e $fish_plugins && set --local file_plugins (string match --regex -- '^[^\s]+$' <$fish_plugins | string replace -- \~ ~)
+
+            if ! set --query argv[2]
+                if test "$cmd" != update
+                    echo "fisher: Not enough arguments for command: \"$cmd\"" >&2 && return 1
+                else if ! set --query file_plugins
+                    echo "fisher: \"$fish_plugins\" file not found: \"$cmd\"" >&2 && return 1
+                end
+                set arg_plugins $file_plugins
+            else if test "$cmd" = install && ! set --query old_plugins[1] 
+                set --append arg_plugins $file_plugins
+            end
+
+            for plugin in $arg_plugins
+                set plugin (test -e "$plugin" && realpath $plugin || string lower -- $plugin)
+                contains -- "$plugin" $new_plugins || set --append new_plugins $plugin
+            end
+
+            if set --query argv[2]
+                for plugin in $new_plugins
+                    if contains -- "$plugin" $old_plugins
+                        test "$cmd" = remove &&
+                            set --append remove_plugins $plugin ||
+                            set --append update_plugins $plugin
+                    else if test "$cmd" = install
+                        set --append install_plugins $plugin
+                    else
+                        echo "fisher: Plugin not installed: \"$plugin\"" >&2 && return 1
+                    end
+                end
+            else
+                for plugin in $new_plugins
+                    contains -- "$plugin" $old_plugins &&
+                        set --append update_plugins $plugin ||
+                        set --append install_plugins $plugin
+                end
+
+                for plugin in $old_plugins
+                    contains -- "$plugin" $new_plugins || set --append remove_plugins $plugin
+                end
+            end
+
+            set --local pid_list
+            set --local source_plugins
+            set --local fetch_plugins $update_plugins $install_plugins
+            set --local fish_path (status fish-path)
+
+            echo (set_color --bold)fisher $cmd version $fisher_version(set_color normal)
+
+            for plugin in $fetch_plugins
+                set --local source (command mktemp -d)
+                set --append source_plugins $source
+
+                command mkdir -p $source/{completions,conf.d,themes,functions}
+
+                $fish_path --command "
+                    if test -e $plugin
+                        command cp -Rf $plugin/* $source
+                    else
+                        set resp (command mktemp)
+                        set temp (command mktemp -d)
+                        set repo (string split -- \@ $plugin) || set repo[2] HEAD
+
+                        if set path (string replace --regex -- '^(https://)?gitlab.com/' '' \$repo[1])
+                            set name (string split -- / \$path)[-1]
+                            set url https://gitlab.com/\$path/-/archive/\$repo[2]/\$name-\$repo[2].tar.gz
+                        else
+                            set url https://api.github.com/repos/\$repo[1]/tarball/\$repo[2]
+                        end
+
+                        echo Fetching (set_color --underline)\$url(set_color normal)
+
+                        set http (command curl -q --silent -L -o \$resp -w %{http_code} \$url)
+
+                        if test \"\$http\" = 200 && command tar -xzC \$temp -f \$resp 2>/dev/null
+                            command cp -Rf \$temp/*/* $source
+                        else if test \"\$http\" = 403
+                            echo fisher: GitHub API rate limit exceeded \(HTTP 403\) >&2
+                            command rm -rf $source
+                        else
+                            echo fisher: Invalid plugin name or host unavailable: \\\"$plugin\\\" >&2
+                            command rm -rf $source
+                        end
+
+                        command rm -rf \$temp
+                    end
+
+                    set files $source/* && string match --quiet --regex -- .+\.fish\\\$ \$files
+                " &
+
+                set --append pid_list (jobs --last --pid)
+            end
+
+            wait $pid_list 2>/dev/null
+
+            for plugin in $fetch_plugins
+                if set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)] && test ! -e $source
+                    if set --local index (contains --index -- "$plugin" $install_plugins)
+                        set --erase install_plugins[$index]
+                    else
+                        set --erase update_plugins[(contains --index -- "$plugin" $update_plugins)]
+                    end
+                end
+            end
+
+            for plugin in $update_plugins $remove_plugins
+                if set --local index (contains --index -- "$plugin" $_fisher_plugins)
+                    set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
+
+                    if contains -- "$plugin" $remove_plugins
+                        for name in (string replace --filter --regex -- '.+/conf\.d/([^/]+)\.fish$' '$1' $$plugin_files_var)
+                            emit {$name}_uninstall
+                        end
+                        printf "%s\n" Removing\ (set_color red --bold)$plugin(set_color normal) "         "$$plugin_files_var | string replace -- \~ ~
+                        set --erase _fisher_plugins[$index]
+                    end
+
+                    command rm -rf (string replace -- \~ ~ $$plugin_files_var)
+
+                    functions --erase (string replace --filter --regex -- '.+/functions/([^/]+)\.fish$' '$1' $$plugin_files_var)
+
+                    for name in (string replace --filter --regex -- '.+/completions/([^/]+)\.fish$' '$1' $$plugin_files_var)
+                        complete --erase --command $name
+                    end
+
+                    set --erase $plugin_files_var
+                end
+            end
+
+            if set --query update_plugins[1] || set --query install_plugins[1]
+                command mkdir -p $fisher_path/{functions,themes,conf.d,completions}
+            end
+
+            for plugin in $update_plugins $install_plugins
+                set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)]
+                set --local files $source/{functions,themes,conf.d,completions}/*
+
+                if set --local index (contains --index -- $plugin $install_plugins)
+                    set --local user_files $fisher_path/{functions,themes,conf.d,completions}/*
+                    set --local conflict_files
+
+                    for file in (string replace -- $source/ $fisher_path/ $files)
+                        contains -- $file $user_files && set --append conflict_files $file
+                    end
+
+                    if set --query conflict_files[1] && set --erase install_plugins[$index]
+                        echo -s "fisher: Cannot install \"$plugin\": please remove or move conflicting files first:" \n"        "$conflict_files >&2
+                        continue
+                    end
+                end
+
+                for file in (string replace -- $source/ "" $files)
+                    command cp -RLf $source/$file $fisher_path/$file
+                end
+
+                set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
+
+                set --query files[1] && set --universal $plugin_files_var (string replace -- $source $fisher_path $files | string replace -- ~ \~)
+
+                contains -- $plugin $_fisher_plugins || set --universal --append _fisher_plugins $plugin
+                contains -- $plugin $install_plugins && set --local event install || set --local event update
+
+                printf "%s\n" Installing\ (set_color --bold)$plugin(set_color normal) "           "$$plugin_files_var | string replace -- \~ ~
+
+                for file in (string match --regex -- '.+/[^/]+\.fish$' $$plugin_files_var | string replace -- \~ ~)
+                    source $file
+                    if set --local name (string replace --regex -- '.+conf\.d/([^/]+)\.fish$' '$1' $file)
+                        emit {$name}_$event
+                    end
+                end
+            end
+
+            command rm -rf $source_plugins
+
+            if set --query _fisher_plugins[1]
+                set --local commit_plugins
+
+                for plugin in $file_plugins
+                    contains -- (string lower -- $plugin) (string lower -- $_fisher_plugins) && set --append commit_plugins $plugin
+                end
+
+                for plugin in $_fisher_plugins
+                    contains -- (string lower -- $plugin) (string lower -- $commit_plugins) || set --append commit_plugins $plugin
+                end
+
+                string replace --regex -- $HOME \~ $commit_plugins >$fish_plugins
+            else
+                set --erase _fisher_plugins
+                command rm -f $fish_plugins
+            end
+
+            set --local total (count $install_plugins) (count $update_plugins) (count $remove_plugins)
+
+            test "$total" != "0 0 0" && echo (string join ", " (
+                test $total[1] = 0 || echo "Installed $total[1]") (
+                test $total[2] = 0 || echo "Updated $total[2]") (
+                test $total[3] = 0 || echo "Removed $total[3]")
+            ) plugin/s
+        case \*
+            echo "fisher: Unknown command: \"$cmd\"" >&2 && return 1
+    end
+end
+
+if ! set --query _fisher_upgraded_to_4_4
+    set --universal _fisher_upgraded_to_4_4
+    if functions --query _fisher_list
+        set --query XDG_DATA_HOME[1] || set --local XDG_DATA_HOME ~/.local/share
+        command rm -rf $XDG_DATA_HOME/fisher
+        functions --erase _fisher_{list,plugin_parse}
+        fisher update >/dev/null 2>/dev/null
+    else
+        for var in (set --names | string match --entire --regex '^_fisher_.+_files$')
+            set $var (string replace -- ~ \~ $$var)
+        end
+        functions --erase _fisher_fish_postexec
+    end
+end

fish/functions/fzf_configure_bindings.fish

@@ -0,0 +1,46 @@
+# Always installs bindings for insert and default mode for simplicity and b/c it has almost no side-effect
+# https://gitter.im/fish-shell/fish-shell?at=60a55915ee77a74d685fa6b1
+function fzf_configure_bindings --description "Installs the default key bindings for fzf.fish with user overrides passed as options."
+    # no need to install bindings if not in interactive mode or running tests
+    status is-interactive || test "$CI" = true; or return
+
+    set -f options_spec h/help 'directory=?' 'git_log=?' 'git_status=?' 'history=?' 'processes=?' 'variables=?'
+    argparse --max-args=0 --ignore-unknown $options_spec -- $argv 2>/dev/null
+    if test $status -ne 0
+        echo "Invalid option or a positional argument was provided." >&2
+        _fzf_configure_bindings_help
+        return 22
+    else if set --query _flag_help
+        _fzf_configure_bindings_help
+        return
+    else
+        # Initialize with default key sequences and then override or disable them based on flags
+        # index 1 = directory, 2 = git_log, 3 = git_status, 4 = history, 5 = processes, 6 = variables
+        set -f key_sequences \e\cf \e\cl \e\cs \cr \e\cp \cv # \c = control, \e = escape
+        set --query _flag_directory && set key_sequences[1] "$_flag_directory"
+        set --query _flag_git_log && set key_sequences[2] "$_flag_git_log"
+        set --query _flag_git_status && set key_sequences[3] "$_flag_git_status"
+        set --query _flag_history && set key_sequences[4] "$_flag_history"
+        set --query _flag_processes && set key_sequences[5] "$_flag_processes"
+        set --query _flag_variables && set key_sequences[6] "$_flag_variables"
+
+        # If fzf bindings already exists, uninstall it first for a clean slate
+        if functions --query _fzf_uninstall_bindings
+            _fzf_uninstall_bindings
+        end
+
+        for mode in default insert
+            test -n $key_sequences[1] && bind --mode $mode $key_sequences[1] _fzf_search_directory
+            test -n $key_sequences[2] && bind --mode $mode $key_sequences[2] _fzf_search_git_log
+            test -n $key_sequences[3] && bind --mode $mode $key_sequences[3] _fzf_search_git_status
+            test -n $key_sequences[4] && bind --mode $mode $key_sequences[4] _fzf_search_history
+            test -n $key_sequences[5] && bind --mode $mode $key_sequences[5] _fzf_search_processes
+            test -n $key_sequences[6] && bind --mode $mode $key_sequences[6] "$_fzf_search_vars_command"
+        end
+
+        function _fzf_uninstall_bindings --inherit-variable key_sequences
+            bind --erase -- $key_sequences
+            bind --erase --mode insert -- $key_sequences
+        end
+    end
+end

hypr/autostart.conf

@@ -0,0 +1,24 @@
+#################
+### AUTOSTART ###
+#################
+
+# Autostart necessary processes (like notifications daemons, status bars, etc.)
+# Or execute your favorite apps at launch like this:
+
+exec-once = dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP XDG_SESSION_TYPE XDG_SESSION_DESKTOP
+exec-once = waybar
+exec-once = swww-daemon
+exec-once = swaync
+exec-once = sh -c "/home/stereov/.local/share/JetBrains/Toolbox/bin/jetbrains-toolbox %u & sleep 6 && hyprctl dispatch closewindow class:jetbrains-toolbox"
+exec-once = "/home/stereov/Developer/antistereov/randrwall/randrwall.py reload"
+exec-once = ~/.config/hypr/scripts/cover-listener.sh
+exec-once = hypridle
+
+exec-once = gsettings set org.gnome.desktop.interface gtk-theme 'adw-gtk3-dark' 
+exec-once = gsettings set org.gnome.desktop.interface color-scheme 'prefer-dark'
+
+exec-once = curl -s https://zenquotes.io/api/random > ~/.cache/quote.json
+exec-once = "/usr/libexec/polkit-mate-authentication-agent-1"
+
+exec-once = seafile-applet
+exec-once = flatpak run org.signal.Signal

hypr/bindings.conf

@@ -0,0 +1,14 @@
+####################
+### KEYBINDINGSS ###
+####################
+
+# See https://wiki.hyprland.org/Configuring/Keywords/
+source = ~/.config/hypr/bindings/tiling.conf
+
+source = ~/.config/hypr/bindings/hyprshot.conf
+source = ~/.config/hypr/bindings/lock.conf
+source = ~/.config/hypr/bindings/media.conf
+source = ~/.config/hypr/bindings/programs.conf
+source = ~/.config/hypr/bindings/randrwall.conf
+
+

hypr/bindings/hyprshot.conf

@@ -0,0 +1,2 @@
+bind = ALT SHIFT, 4, exec, hyprshot -m region
+bind = ALT SHIFT, 5, exec, hyprshot -m window

hypr/bindings/lock.conf

@@ -0,0 +1 @@
+bind = CTRL ALT, Q, exec, hyprlock

hypr/bindings/media.conf

@@ -0,0 +1,19 @@
+# Only display the OSD on the currently focused monitor
+$osdclient = swayosd-client --monitor "$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+
+# Laptop multimedia keys for volume and LCD brightness (with OSD)
+bindeld = ,XF86AudioRaiseVolume, Volume up, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
+bindeld = ,XF86AudioLowerVolume, Volume down, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
+bindeld = ,XF86AudioMute, Mute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bindeld = ,XF86AudioMicMute, Mute microphone, exec, $osdclient --input-volume mute-toggle
+bindeld = ,XF86MonBrightnessUp, Brightness up, exec, brightnessctl set +5%
+bindeld = ,XF86MonBrightnessDown, Brightness down, exec, brightnessctl set 5%-
+
+# Requires playerctl
+bindld = , XF86AudioNext, Next track, exec, playerctl next
+bindld = , XF86AudioPause, Pause, exec, playerctl play-pause
+bindld = , XF86AudioPlay, Play, exec, playerctl play-pause
+bindld = , XF86AudioPrev, Previous track, exec, playerctl previous
+
+# Switch audio output with Super + Mute
+bindld = SUPER, XF86AudioMute, Switch audio output, exec, omarchy-cmd-audio-switch

hypr/bindings/programs.conf

@@ -0,0 +1,6 @@
+bind = $mainMod, RETURN, exec, $terminal
+bind = $mainMod, W, killactive,
+bind = $mainMod, M, exit,
+bind = $mainMod, E, exec, $fileManager
+bind = $mainMod, B, exec, $browser
+bind = ALT, space, exec, $menu

hypr/bindings/randrwall.conf

@@ -0,0 +1,4 @@
+$randrwall = "/home/stereov/.config/hypr/scripts/randrwall.py"
+
+bind = SUPER SHIFT, W, exec, $randrwall random
+bind = SUPER SHIFT, F, exec, $randrwall favorite 

hypr/bindings/tiling.conf

@@ -1,17 +1,7 @@
-####################
-### KEYBINDINGSS ###
-####################
-
-# See https://wiki.hyprland.org/Configuring/Keywords/
 $mainMod = SUPER # Sets "Windows" key as main modifier
 
 # Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
-bind = $mainMod, Q, exec, $terminal
+bind = $mainMod, F, togglefloating,
-bind = $mainMod, C, killactive,
-bind = $mainMod, M, exit,
-bind = $mainMod, E, exec, $fileManager
-bind = $mainMod, V, togglefloating,
-bind = ALT, space, exec, $menu
 bind = $mainMod, P, pseudo, # dwindle
 bind = $mainMod SHIFT, J, togglesplit, # dwindle
 
@@ -21,6 +11,9 @@ bind = $mainMod, L, movefocus, r
 bind = $mainMod, K, movefocus, u
 bind = $mainMod, J, movefocus, d
 
+bind = CTRL ALT, left, workspace, e-1
+bind = CTRL ALT, right, workspace, e+1
+
 # Resize with Mod + Shift + HJKL (repeatable)
 binde = $mainMod ALT, L, resizeactive, 50 0
 binde = $mainMod ALT, H, resizeactive, -50 0
@@ -69,4 +62,3 @@ bind = $mainMod, mouse_up, workspace, e-1
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow
 
-

hypr/colors.conf

@@ -0,0 +1,31 @@
+$accent = $lavender
+
+# accents
+$rosewater = rgba(f5e0dcFF)
+$flamingo  = rgba(f2cdcdFF)
+$pink      = rgba(f5c2e7FF)
+$mauve     = rgba(cba6f7FF)
+$red       = rgba(f38ba8FF)
+$maroon    = rgba(eba0acFF)
+$peach     = rgba(fab387FF)
+$yellow    = rgba(f9e2afFF)
+$green     = rgba(a6e3a1FF)
+$teal      = rgba(94e2d5FF)
+$sky       = rgba(89dcebFF)
+$sapphire  = rgba(74c7ecFF)
+$blue      = rgba(89b4faFF)
+$lavender  = rgba(b4befeFF)
+
+# text
+$text      = rgba(cdd6f4FF)
+$subtext1  = rgba(bac2deFF)
+$subtext0  = rgba(a6adc8FF)
+
+# surfaces
+$surface0  = rgba(313244FF)
+$surface1  = rgba(45475aFF)
+$surface2  = rgba(585b70FF)
+$base      = rgba(1e1e2eFF)
+$mantle    = rgba(181825FF)
+$crust     = rgba(11111bFF)
+

hypr/environment.conf

@@ -0,0 +1,25 @@
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+# See https://wiki.hyprland.org/Configuring/Environment-variables/
+
+env = XCURSOR_SIZE,24
+env = HYPRCURSOR_SIZE,24
+
+env = GDK_SCALE,1
+env = XCURSOR_SIZE,24
+env = QT_AUTO_SCREEN_SCALE_FACTOR,0
+env = QT_SCALE_FACTOR,1
+env = _JAVA_AWT_WM_NONREPARENTING,1
+env = AWT_TOOLKIT,MToolkit
+env = WINIT_X11_SCALE_FACTOR,1
+env = XWAYLAND_NO_GLAMOR,0
+
+env = XDG_CURRENT_DESKTOP,Hyprland
+env = XDG_SESSION_TYPE,wayland
+env = XDG_SESSION_DESKTOP,Hyprland
+
+xwayland {
+    force_zero_scaling = true
+}

hypr/hypridle.conf

@@ -0,0 +1,29 @@
+general {
+    lock_cmd = hyprlock                         # lock screen and 1password
+    before_sleep_cmd = loginctl lock-session               # lock before suspend.
+    after_sleep_cmd = hyprctl dispatch dpms on             # to avoid having to press a key twice to turn on the display.
+    inhibit_sleep = 3                                      # wait until screen is locked
+}
+
+listener {
+    timeout = 290
+    on-timeout = ~/.config/hypr/scripts/dim-display.sh dim
+    on-resume = ~/.config/hypr/scripts/dim-display.sh restore
+}
+
+listener {
+    timeout = 300
+    on-timeout = loginctl lock-session
+}
+
+listener {
+    timeout = 300 
+    on-timeout = ~/.config/hypr/scripts/dim-keyboard.sh dim
+    on-resume = ~/.config/hypr/scripts/dim-keyboard.sh restore
+  }
+
+listener {
+    timeout = 305                                         # 5.5min
+    on-timeout = hyprctl dispatch dpms off                   # screen off when timeout has passed
+    on-resume = hyprctl dispatch dpms on && brightnessctl -r # screen on when activity is detected
+}

hypr/hyprland.conf

@@ -1,146 +1,10 @@
+source = ~/.config/hypr/autostart.conf
 source = ~/.config/hypr/monitors.conf
 source = ~/.config/hypr/programs.conf
-source = ~/.config/hypr/binds.conf
+source = ~/.config/hypr/bindings.conf
-
+source = ~/.config/hypr/input.conf
-#################
+source = ~/.config/hypr/looknfeel.conf
-### AUTOSTART ###
+source = ~/.config/hypr/environment.conf
-#################
-
-# Autostart necessary processes (like notifications daemons, status bars, etc.)
-# Or execute your favorite apps at launch like this:
-
-# exec-once = $terminal
-# exec-once = nm-applet &
-# exec-once = waybar & hyprpaper & firefox
-exec-once = waybar & hyprpaper
-
-#############################
-### ENVIRONMENT VARIABLES ###
-#############################
-
-# See https://wiki.hyprland.org/Configuring/Environment-variables/
-
-env = XCURSOR_SIZE,24
-env = HYPRCURSOR_SIZE,24
-
-
-#####################
-### LOOK AND FEEL ###
-#####################
-
-# Refer to https://wiki.hyprland.org/Configuring/Variables/
-
-# https://wiki.hyprland.org/Configuring/Variables/#general
-general { 
-    gaps_in = 5
-    gaps_out = 20
-
-    border_size = 2
-
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
-    col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
-    col.inactive_border = rgba(595959aa)
-
-    # Set to true enable resizing windows by clicking and dragging on borders and gaps
-    resize_on_border = false 
-
-    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
-    allow_tearing = false
-
-    layout = dwindle
-}
-
-# https://wiki.hyprland.org/Configuring/Variables/#decoration
-decoration {
-    rounding = 10
-
-    # Change transparency of focused and unfocused windows
-    active_opacity = 1.0
-    inactive_opacity = 1.0
-
-    drop_shadow = true
-    shadow_range = 4
-    shadow_render_power = 3
-    col.shadow = rgba(1a1a1aee)
-
-    # https://wiki.hyprland.org/Configuring/Variables/#blur
-    blur {
-        enabled = true
-        size = 3
-        passes = 1
-        
-        vibrancy = 0.1696
-    }
-}
-
-# https://wiki.hyprland.org/Configuring/Variables/#animations
-animations {
-    enabled = true
-
-    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
-
-    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
-
-    animation = windows, 1, 7, myBezier
-    animation = windowsOut, 1, 7, default, popin 80%
-    animation = border, 1, 10, default
-    animation = borderangle, 1, 8, default
-    animation = fade, 1, 7, default
-    animation = workspaces, 1, 6, default
-}
-
-# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
-dwindle {
-    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
-    preserve_split = true # You probably want this
-}
-
-# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
-master {
-    new_status = master
-}
-
-# https://wiki.hyprland.org/Configuring/Variables/#misc
-misc { 
-    force_default_wallpaper = -1 # Set to 0 or 1 to disable the anime mascot wallpapers
-    disable_hyprland_logo = false # If true disables the random hyprland logo / anime girl background. :(
-}
-
-
-#############
-### INPUT ###
-#############
-
-# https://wiki.hyprland.org/Configuring/Variables/#input
-input {
-    kb_layout = us
-    kb_variant =
-    kb_model =
-    kb_options =
-    kb_rules =
-
-    follow_mouse = 1
-
-    sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
-
-    touchpad {
-        natural_scroll = true
-    }
-}
-
-# https://wiki.hyprland.org/Configuring/Variables/#gestures
-gestures {
-    workspace_swipe = false
-}
-
-# Example per-device config
-# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
-device {
-    name = epic-mouse-v1
-    sensitivity = -0.5
-}
-
-
 
 ##############################
 ### WINDOWS AND WORKSPACES ###
@@ -155,4 +19,3 @@ device {
 # Example windowrule v2
 # windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
 
-windowrulev2 = suppressevent maximize, class:.* # You'll probably like this.

hypr/hyprlock.conf

@@ -0,0 +1,145 @@
+$color = rgba(#1e1e2e, 1.0)
+$inner_color = rgba(#1e1e2e, 0.8)
+$outer_color = rgba(#cdd6f4, 1.0)
+$font_color = rgba(#cdd6f4, 1.0)
+$check_color = rgba(#380000, 1.0)
+
+general {
+    ignore_empty_input = true
+    no_fade_in = true
+    no_fade_out = true
+    hide_cursor = false
+    grace = 0
+    disable_loading_bar = false
+}
+
+background {
+    monitor =
+    color = $color
+    path = ~/Pictures/Wallpapers/current
+    blur_passes = 3
+}
+
+animations {
+    enabled = true
+}
+
+# DATE
+label {
+  monitor =
+  text = cmd[update:1000] echo "$(date +"%A, %B %d")"
+  color = rgba(242, 243, 244, 0.75)
+  font_size = 16
+  font_family = Lexend Light 
+  position = 0, 300
+  halign = center
+  valign = center
+}
+
+# TIME
+label {
+  monitor = 
+  text = cmd[update:1000] echo "$(date +"%H:%M")"
+  color = rgba(242, 243, 244, 0.75)
+  font_size = 150 
+  font_family = Lexend Extrabold
+  position = 0, 200
+  halign = center
+  valign = center
+}
+
+# NETWORK
+label {
+  monitor =
+  text = cmd[update:2000] ~/.config/hypr/scripts/net-status.sh
+  color = rgba(242, 243, 244, 0.8)
+  font_size = 14
+  font_family = Lexend
+  position = 100, 100
+  halign = bottom
+  valign = left
+}
+
+# BATTERY
+label {
+    monitor =
+    text = cmd[update:1000] echo "$(~/.config/hypr/scripts/battery.sh)"
+    font_family = lexend
+    font_size = 14 
+    position = -100, 100
+    halign = right
+    valign = bottom
+}
+
+# WEATHER
+label {
+    monitor =
+    text = cmd[update:600000] echo "$(~/.config/hypr/scripts/weather.sh | jq -r .text)"
+    font_family = lexend
+    font_size = 14 
+    position = -200, 100
+    halign = right
+    valign = bottom
+}
+
+# NOW PLAYING
+image {
+    monitor =
+    path = ~/.cache/nowplaying-cover.jpg
+    size = 300
+    rounding = 20
+    position = 0, -150
+    halign = center
+    valign = center
+    border_size = 0
+    reload_time = 1
+}
+
+label {
+    monitor =
+    text = cmd[update:1000] playerctl metadata title || jq -r '.[0].q' ~/.cache/quote.json
+    color = rgba(242, 243, 244, 0.8)
+    font_size = 14
+    font_family = Lexend
+    position = 0, -320
+    halign = center
+    valign = center
+}
+
+label {
+    monitor =
+    text = cmd[update:1000] playerctl metadata artist || jq -r '.[0].a' ~/.cache/quote.json
+    color = rgba(242, 243, 244, 0.8)
+    font_size = 14 
+    font_family = Lexend Bold
+    position = 0, -345
+    halign = center
+    valign = center
+}
+
+input-field {
+    monitor =
+    size = 300, 50
+    position = 0, 100
+    halign = center
+    valign = bottom
+
+    inner_color = rgba(242, 243, 244, 0.8)
+    outer_color = $outer_color
+    outline_thickness = 4
+
+    font_family = Lexend
+    font_color = $font_color
+
+    placeholder_text = Enter Password
+    check_color = $check_color
+    fail_text = $FAIL
+
+    rounding = 10 
+    shadow_passes = 0
+    fade_on_empty = true
+}
+
+auth {
+    fingerprint:enabled = true
+}

hypr/hyprpaper.conf

@@ -1,2 +1,3 @@
-preload = /usr/share/backgrounds/Dynamic_Wallpapers/Ocean/Ocean-1.png
+preload = /home/stereov/.config/wallpaper/current.png
-wallpaper = , /usr/share/backgrounds/Dynamic_Wallpapers/Ocean/Ocean-1.png
+wallpaper = , /home/stereov/.config/wallpaper/current.png
+splash = true

hypr/input.conf

@@ -0,0 +1,29 @@
+#############
+### INPUT ###
+#############
+
+# https://wiki.hyprland.org/Configuring/Variables/#input
+input {
+    kb_layout = us
+    kb_variant = altgr-intl
+    kb_options = caps:escape
+    kb_rules =
+
+    follow_mouse = 1
+
+    sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
+
+    touchpad {
+        natural_scroll = true
+    }
+}
+
+gesture = 3, horizontal, workspace
+
+# Example per-device config
+# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
+device {
+    name = epic-mouse-v1
+    sensitivity = -0.5
+}
+

hypr/looknfeel.conf

@@ -0,0 +1,86 @@
+#####################
+### LOOK AND FEEL ###
+#####################
+
+source = ~/.config/hypr/colors.conf
+
+# Refer to https://wiki.hyprland.org/Configuring/Variables/
+
+# https://wiki.hyprland.org/Configuring/Variables/#general
+general { 
+  gaps_in = 5
+  gaps_out = 5 
+
+  border_size = 2
+
+  # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
+  col.active_border = $accent
+  col.inactive_border = $surface2
+
+  # Set to true enable resizing windows by clicking and dragging on borders and gaps
+  resize_on_border = false 
+
+  # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
+  allow_tearing = false
+
+  layout = dwindle
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#decoration
+decoration {
+  rounding = 10
+
+  # Change transparency of focused and unfocused windows
+  active_opacity = 0.99
+  inactive_opacity = 0.9
+
+  # https://wiki.hyprland.org/Configuring/Variables/#blur
+  blur {
+    enabled = true
+    size = 5
+    passes = 1
+    vibrancy = 0.1696
+    ignore_opacity = false
+  }
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#animations
+animations {
+  enabled = true
+
+  # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
+  bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+
+  animation = windows, 1, 7, myBezier
+  animation = windowsOut, 1, 7, default, popin 80%
+  animation = border, 1, 10, default
+  animation = borderangle, 1, 8, default
+  animation = fade, 1, 7, default
+  animation = workspaces, 1, 6, default
+}
+
+# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
+dwindle {
+  pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+  preserve_split = true # You probably want this
+}
+
+# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
+master {
+  new_status = master
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#misc
+misc { 
+  force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
+  disable_hyprland_logo = true # If true disables the random hyprland logo / anime girl background. :(
+  disable_splash_rendering = true
+  background_color = 0x000000
+}
+
+layerrule {
+  name = waybar_blur
+  match:namespace = waybar
+  blur = on
+  ignore_alpha = 0.1
+}

hypr/monitors.conf

@@ -5,5 +5,8 @@
 # See https://wiki.hyprland.org/Configuring/Monitors/
 monitor=,preferred, auto, auto
 monitor=eDP-1, 2256x1504, 0x0, 1.175
-monitor=DP-10, 3440x1440, -3440x0, 1
+monitor=DP-10, 3840x2160, -640x-1800, 1.2
+
+bindl = , switch:on:Lid Switch, exec, ~/.config/hypr/scripts/lid.sh off
+bindl = , switch:off:Lid Switch, exec, ~/.config/hypr/scripts/lid.sh on
 

hypr/programs.conf

@@ -6,7 +6,8 @@
 
 # Set programs that you use
 $terminal = kitty
-$fileManager = dolphin
+$fileManager = nautilus
-$menu = rofi -show drun
+$browser = flatpak run app.zen_browser.zen
+$menu = rofi -show drun -terminal kitty -kb-cancel Escape -theme ~/.local/share/rofi/themes/modern/style.rasi
 
 

hypr/scripts/battery.sh

@@ -0,0 +1,55 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+# Find battery + AC device (works on most laptops)
+BAT="$(ls -1 /sys/class/power_supply 2>/dev/null | grep -E '^BAT|^CMB|^BATT' | head -n1 || true)"
+AC="$(ls -1 /sys/class/power_supply 2>/dev/null | grep -E '^AC|^ADP|^ACAD' | head -n1 || true)"
+
+if [[ -z "${BAT}" ]]; then
+  echo "  --%" # unknown
+  exit 0
+fi
+
+BAT_PATH="/sys/class/power_supply/${BAT}"
+STATUS="$(<"${BAT_PATH}/status")"     # Charging|Discharging|Full|Not charging|Unknown
+CAPACITY="$(<"${BAT_PATH}/capacity")" # 0-100
+
+#  0-10,  11-35,  36-60,  61-85,  86-100
+if ((CAPACITY <= 10)); then
+  if [[ "${STATUS}" == "Charging" || "${STATUS}" == "Not charging" || "${STATUS}" == "Full" ]]; then
+    ICON="󰢜 "
+  else
+    ICON="󰁺 "
+  fi
+elif ((CAPACITY <= 30)); then
+  if [[ "${STATUS}" == "Charging" || "${STATUS}" == "Not charging" || "${STATUS}" == "Full" ]]; then
+    ICON="󰂇 "
+  else
+    ICON="󰁼 "
+  fi
+elif ((CAPACITY <= 60)); then
+  if [[ "${STATUS}" == "Charging" || "${STATUS}" == "Not charging" || "${STATUS}" == "Full" ]]; then
+    ICON="󰂉 "
+  else
+    ICON="󰁿 "
+  fi
+elif ((CAPACITY <= 80)); then
+  if [[ "${STATUS}" == "Charging" || "${STATUS}" == "Not charging" || "${STATUS}" == "Full" ]]; then
+    ICON="󰂊 "
+  else
+    ICON="󰂁 "
+  fi
+else
+  if [[ "${STATUS}" == "Charging" || "${STATUS}" == "Not charging" ]]; then
+    ICON="󰂅 "
+  else
+    ICON="󰁹 "
+  fi
+fi
+
+# If full, show a nicer indicator
+if [[ "${STATUS}" == "Full" ]]; then
+  CHG_IND=" " # nf-fa-check
+fi
+
+echo "${ICON} ${CAPACITY}%"

hypr/scripts/cover-listener.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+playerctl metadata --follow --format "{{mpris:artUrl}}" | while read -r _; do
+  ~/.config/hypr/scripts/cover.sh
+done

hypr/scripts/cover.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+CACHE="$HOME/.cache/nowplaying-cover.jpg"
+TMP="$HOME/.cache/nowplaying-cover.tmp.jpg"
+
+status=$(playerctl status 2>/dev/null)
+
+if [ "$status" != "Playing" ]; then
+  rm -f "$CACHE"
+  exit 0
+fi
+
+url=$(playerctl metadata mpris:artUrl)
+
+[ -z "$url" ] && rm -f "$CACHE" && exit 0
+
+if [[ "$url" == file://* ]]; then
+  cp "${url#file://}" "$TMP"
+else
+  curl -sL "$url" -o "$TMP"
+fi
+
+mv -f "$TMP" "$CACHE"

hypr/scripts/dim-display.sh

@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+SCREEN_DEVICE="amdgpu_bl1"
+
+STATE_DIR="${XDG_RUNTIME_DIR:-/tmp}/hypridle"
+SCREEN_STATE_FILE="$STATE_DIR/screen"
+
+mkdir -p "$STATE_DIR"
+
+save_current() {
+  brightnessctl -d "$SCREEN_DEVICE" g >"$SCREEN_STATE_FILE"
+}
+
+dim() {
+  save_current
+  brightnessctl -d "$SCREEN_DEVICE" set 10%
+}
+
+restore() {
+  [[ -f "$SCREEN_STATE_FILE" ]] && brightnessctl -d "$SCREEN_DEVICE" s "$(cat "$SCREEN_STATE_FILE")"
+}
+
+case "${1:-}" in
+dim)
+  dim
+  ;;
+restore)
+  restore
+  ;;
+*)
+  echo "Usage: $0 {dim|restore}"
+  exit 1
+  ;;
+esac

hypr/scripts/dim-keyboard.sh

@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+KBD_DEVICE="chromeos::kbd_backlight"
+
+STATE_DIR="${XDG_RUNTIME_DIR:-/tmp}/hypridle"
+KBD_STATE_FILE="$STATE_DIR/kbd"
+
+mkdir -p "$STATE_DIR"
+
+save_current() {
+  brightnessctl -d "$KBD_DEVICE" g >"$KBD_STATE_FILE"
+}
+
+dim() {
+  save_current
+  brightnessctl -d "$KBD_DEVICE" set 0
+}
+
+restore() {
+  [[ -f "$KBD_STATE_FILE" ]] && brightnessctl -d "$KBD_DEVICE" s "$(cat "$KBD_STATE_FILE")"
+}
+
+case "${1:-}" in
+dim)
+  dim
+  ;;
+restore)
+  restore
+  ;;
+*)
+  echo "Usage: $0 {dim|restore}"
+  exit 1
+  ;;
+esac

hypr/scripts/lid.sh

@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+ACTION="${1:-}" # "on" oder "off"
+LAPTOP="eDP-1"
+LAPTOP_MODE="2256x1504"
+LAPTOP_SCALE="1.175"
+
+has_external() {
+  hyprctl monitors | awk '/^Monitor /{print $2}' | grep -vq "^${LAPTOP}$"
+}
+
+enable_laptop() {
+  hyprctl keyword monitor "${LAPTOP}, ${LAPTOP_MODE}, 0x0, ${LAPTOP_SCALE}"
+  hyprctl dispatch dpms on "${LAPTOP}" 2>/dev/null || true
+}
+
+disable_laptop() {
+  hyprctl keyword monitor "${LAPTOP}, disable"
+}
+
+case "$ACTION" in
+off)
+  if has_external; then
+    disable_laptop
+  else
+    disable_laptop
+    hyprlock
+  fi
+  ;;
+
+on)
+  enable_laptop
+  ;;
+
+*)
+  echo "usage: $0 {on|off}" >&2
+  exit 2
+  ;;
+esac

hypr/scripts/net-status.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+IFACE="wlp1s0"
+
+# Prüfen ob Interface existiert
+if [ ! -d "/sys/class/net/$IFACE" ]; then
+  echo "󰤮  no iface"
+  exit 0
+fi
+
+STATE=$(cat /sys/class/net/$IFACE/operstate 2>/dev/null)
+
+if [ "$STATE" != "up" ]; then
+  echo "󰤮  Disconnected"
+  exit 0
+fi
+
+# SSID holen
+SSID=$(iw dev "$IFACE" link 2>/dev/null | awk -F': ' '/SSID/ {print $2}')
+SIGNAL=$(iw dev "$IFACE" link 2>/dev/null | awk -F'signal: ' '/signal/ {print $2}' | awk '{print $1}')
+
+if [ -z "$SSID" ]; then
+  echo "󰤮  Disconnected"
+  exit 0
+fi
+
+# Icon je nach dBm (realistische Werte: -30 sehr stark, -90 sehr schwach)
+if ((SIGNAL >= -50)); then
+  ICON="󰤨 " # stark
+elif ((SIGNAL >= -65)); then
+  ICON="󰤥 " # mittel
+elif ((SIGNAL >= -75)); then
+  ICON="󰤢 " # schwach
+else
+  ICON="󰤟 " # sehr schwach
+fi
+
+echo "${ICON} ${SSID}"

hypr/scripts/nowplaying.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+status=$(playerctl status 2>/dev/null)
+
+if [ "$status" = "Playing" ]; then
+  artist=$(playerctl metadata artist)
+  title=$(playerctl metadata title)
+  echo "$artist - $title"
+else
+  echo ""
+fi

hypr/scripts/randrwall.py

@@ -0,0 +1,309 @@
+#!/usr/bin/env python3
+
+import argparse
+import json
+from os import environ
+import random
+import shutil
+import subprocess
+import sys
+from pathlib import Path
+from urllib.parse import quote
+
+import urllib.request
+
+HOME = Path.home()
+
+BASE_DIR = HOME / "Pictures" / "Wallpapers"
+FAV_DIR = BASE_DIR / "favorites"
+CACHE_DIR = BASE_DIR / "cache"
+CURRENT = BASE_DIR / "current"
+STATE_FILE = HOME / ".cache" / "randrwall_state.json"
+
+DEFAULT_TAGS = [
+    "space",
+    "nebula",
+    "cyberpunk",
+    "minimal",
+    "architecture",
+    "landscape",
+    "fantasy",
+    "digital art",
+]
+ATLEAST = "3840x2160"
+RATIOS = "16x9,21x9"
+SORTING = "random"
+
+CATEGORIES = "110"
+PURITY = "100"
+
+
+def load_env_file(path: Path) -> None:
+    if not path.exists():
+        return
+    for line in path.read_text().splitlines():
+        line = line.strip()
+        if not line or line.startswith("#"):
+            continue
+        if "=" not in line:
+            continue
+        k, v = line.split("=", 1)
+        environ.setdefault(k.strip(), v.strip())
+
+
+load_env_file(Path() / ".env")
+API_KEY = environ.get("WALLHAVEN_API_KEY")
+
+
+def run(cmd: list[str]) -> None:
+    subprocess.run(cmd, check=True)
+
+
+def ensure_dirs() -> None:
+    FAV_DIR.mkdir(parents=True, exist_ok=True)
+    CACHE_DIR.mkdir(parents=True, exist_ok=True)
+    STATE_FILE.parent.mkdir(parents=True, exist_ok=True)
+
+
+def read_state() -> dict:
+    if STATE_FILE.exists():
+        try:
+            return json.loads(STATE_FILE.read_text(encoding="utf-8"))
+        except Exception:
+            return {}
+    return {}
+
+
+def write_state(state: dict) -> None:
+    STATE_FILE.write_text(json.dumps(state, indent=2), encoding="utf-8")
+
+
+def is_image(path: Path) -> bool:
+    return path.suffix.lower() in {".jpg", ".jpeg", ".png", ".webp"}
+
+
+def swww_set(path: Path) -> None:
+    run(
+        [
+            "swww",
+            "img",
+            str(path),
+        ]
+    )
+
+
+def pick_random_from(dir_path: Path) -> Path | None:
+    if not dir_path.exists():
+        return None
+
+    imgs = [p for p in dir_path.iterdir() if p.is_file() and is_image(p)]
+    if not imgs:
+        return None
+    return random.choice(imgs)
+
+
+UA = "randrwall/0.1 (+https://gitea.stereov.io/antistereov/randrwall)"
+
+HEADERS = {
+    "User-Agent": UA,
+    "Referer": "https://wallhaven.cc/",
+    "Accept": "*/*",
+}
+
+
+def http_get_json(url: str, timeout: int = 15) -> dict:
+    req = urllib.request.Request(url, headers=HEADERS)
+    with urllib.request.urlopen(req, timeout=timeout) as resp:
+        return json.loads(resp.read().decode("utf-8"))
+
+
+def wallhaven_search_random(tags: list[str]) -> str:
+    tag = random.choice(tags)
+    q = quote(tag)
+
+    params = (
+        f"q={q}"
+        f"&categories={CATEGORIES}"
+        f"$purity={PURITY}"
+        f"&atleast={ATLEAST}"
+        f"&ratios={quote(RATIOS)}"
+        f"&sorting={SORTING}"
+        "&order=desc"
+        "&page=1"
+    )
+
+    if API_KEY:
+        print("Using API key")
+        params += f"&apiKey={API_KEY}"
+
+    url = f"https://wallhaven.cc/api/v1/search?{params}"
+
+    data = http_get_json(url)
+
+    arr = data.get("data") or []
+    if not arr:
+        raise RuntimeError(f"Wallhaven: no results for tag='{tag}'")
+
+    item = random.choice(arr)
+    path = item.get("path")
+    if not path:
+        raise RuntimeError("Wallhaven: response does not contain 'path'")
+    return path
+
+
+def prune_cache(max_files: int = 10) -> None:
+    if max_files <= 0:
+        return
+
+    files = [p for p in CACHE_DIR.iterdir() if p.is_file() and is_image(p)]
+    files.sort(key=lambda p: p.stat().st_mtime, reverse=True)
+
+    for p in files[max_files:]:
+        try:
+            p.unlink()
+        except Exception:
+            pass
+
+
+def download_to_cache(url: str) -> Path:
+    filename = url.split("/")[-1]
+    out = CACHE_DIR / filename
+    if out.exists() and out.stat().st_size > 0:
+        return out
+
+    tmp_path = CACHE_DIR / (filename + ".part")
+
+    req = urllib.request.Request(url, headers=HEADERS, method="GET")
+
+    try:
+        with urllib.request.urlopen(req, timeout=30) as resp:
+            if resp.status != 200:
+                raise RuntimeError(f"Download failed: HTTP {resp.status}")
+            with open(tmp_path, "wb") as f:
+                shutil.copyfileobj(resp, f)
+
+        tmp_path.replace(out)
+        prune_cache()
+        return out
+    finally:
+        try:
+            if tmp_path.exists():
+                tmp_path.unlink()
+
+        except Exception:
+            pass
+
+
+def copy_to_current(img: Path) -> None:
+    shutil.copy2(img, CURRENT)
+
+
+def cmd_random(args: argparse.Namespace) -> None:
+    ensure_dirs()
+    state = read_state()
+
+    use_fav = random.random() < args.fav_weight
+    fav_pick = pick_random_from(FAV_DIR) if use_fav else None
+
+    if fav_pick is not None:
+        swww_set(fav_pick)
+        state["current"] = str(fav_pick)
+        state["source"] = "favorites"
+        write_state(state)
+        print(f"Set (favorites): {fav_pick}")
+        copy_to_current(fav_pick)
+        return
+
+    url = wallhaven_search_random(args.tags)
+    img = download_to_cache(url)
+    swww_set(img)
+    copy_to_current(img)
+
+    state["current"] = str(img)
+    state["source"] = "wallhaven"
+    state["wallhaven_url"] = url
+    write_state(state)
+    print(f"Set (download): {img}")
+
+
+def cmd_favorite(args: argparse.Namespace) -> None:
+    ensure_dirs()
+    state = read_state()
+    cur = state.get("current")
+
+    if not cur:
+        print(
+            "No current wallpaper found in state. Please set one first via 'random'",
+            file=sys.stderr,
+        )
+        sys.exit(1)
+
+    src = Path(cur)
+    if not src.exists():
+        print(f"Current wallpaper does not exist anymore: {src}", file=sys.stderr)
+        sys.exit(1)
+
+    dest = FAV_DIR / src.name
+    if dest.exists():
+        print(f"Already in favorites: {dest}")
+        return
+
+    shutil.copy2(src, dest)
+    print(f"Saved to favorites: {dest}")
+
+
+def reload(args: argparse.Namespace) -> None:
+    ensure_dirs()
+    state = read_state()
+    cur = state.get("current")
+
+    if not cur:
+        print(
+            "No current wallpaper found in state. Please set one first via 'random'",
+            file=sys.stderr,
+        )
+        sys.exit(1)
+
+    src = Path(cur)
+    if not src.exists():
+        print(f"Current wallpaper does not exist anymore: {src}", file=sys.stderr)
+        sys.exit(1)
+
+    swww_set(cur)
+
+
+def main() -> None:
+    parser = argparse.ArgumentParser(
+        description="Hyprland wallpaper helper (swww + wallhaven + favorites"
+    )
+    sub = parser.add_subparsers(dest="cmd", required=True)
+
+    p_random = sub.add_parser(
+        "random", help="Set random wallpaper (favorites or download)"
+    )
+    p_random.add_argument(
+        "--fav-weight",
+        type=float,
+        default=0.3,
+        help="Probability to pick from favorites (0..1). Default: 0.3",
+    )
+    p_random.add_argument(
+        "--tags",
+        nargs="+",
+        default=DEFAULT_TAGS,
+        help=f"Wall haven tags list. Default: {DEFAULT_TAGS}",
+    )
+    p_random.set_defaults(func=cmd_random)
+
+    p_fav = sub.add_parser("favorite", help="Save current wallpaper to favorites")
+    p_fav.set_defaults(func=cmd_favorite)
+
+    p_fav = sub.add_parser("reload", help="Reload current wallpaper")
+    p_fav.set_defaults(func=reload)
+
+    args = parser.parse_args()
+    args.func(args)
+
+
+if __name__ == "__main__":
+    main()

hypr/scripts/weather.sh

@@ -0,0 +1,102 @@
+#!/bin/bash
+
+# --- CONFIGURATION ---
+LAT="51.0509"  # Replace with your Latitude
+LON="13.7383"  # Replace with your Longitude
+UNITS="metric" # Use "metric" for Celsius, "imperial" for Fahrenheit
+TZ="Europe/Berlin"
+# ---------------------
+
+if [[ "$UNITS" == "metric" ]]; then
+  TEMP_UNIT="celsius"
+  LABEL="°C"
+else
+  TEMP_UNIT="fahrenheit"
+  LABEL="°F"
+fi
+
+# Fetch the weather data
+RESPONSE=$(curl -s "https://api.open-meteo.com/v1/forecast?latitude=${LAT}&longitude=${LON}&current=temperature_2m,weather_code,is_day&timezone=${TZ}")
+
+# Check if curl failed to get a response
+if [ -z "$RESPONSE" ]; then
+  echo "No connection"
+  exit 1
+fi
+
+TEMP=$(echo "$RESPONSE" | jq -r '.current.temperature_2m | round')
+CODE=$(echo "$RESPONSE" | jq -r '.current.weather_code')
+IS_DAY=$(echo "$RESPONSE" | jq -r '.current.is_day')
+
+case "$CODE" in
+0)
+  if [[ "$IS_DAY" == "1" ]]; then
+    ICON=" " # nf-weather-day_sunny
+  else
+    ICON=" " # nf-weather-night_clear
+  fi
+  DESC="Clear sky"
+  ;;
+1 | 2)
+  if [[ "$IS_DAY" == "1" ]]; then
+    ICON=" " # nf-weather-day_cloudy
+  else
+    ICON=" " # nf-weather-night_alt_cloudy
+  fi
+  DESC="Partly cloudy"
+  ;;
+3)
+  ICON=" " # nf-weather-cloudy
+  DESC="Overcast"
+  ;;
+45 | 48)
+  ICON=" " # nf-weather-fog
+  DESC="Fog"
+  ;;
+51 | 53 | 55)
+  ICON=" " # nf-weather-sprinkle
+  DESC="Drizzle"
+  ;;
+56 | 57)
+  ICON=" "
+  DESC="Freezing drizzle"
+  ;;
+61 | 63 | 65)
+  ICON=" " # nf-weather-rain
+  DESC="Rain"
+  ;;
+66 | 67)
+  ICON=" "
+  DESC="Freezing rain"
+  ;;
+71 | 73 | 75 | 77)
+  ICON=" " # nf-weather-snow
+  DESC="Snow"
+  ;;
+80 | 81 | 82)
+  ICON=" " # nf-weather-showers
+  DESC="Rain showers"
+  ;;
+85 | 86)
+  ICON=" "
+  DESC="Snow showers"
+  ;;
+95)
+  ICON=" " # nf-weather-thunderstorm
+  DESC="Thunderstorm"
+  ;;
+96 | 99)
+  ICON=" "
+  DESC="Thunderstorm with hail"
+  ;;
+esac
+
+# Determine unit label
+if [ "$UNITS" = "metric" ]; then
+  LABEL="°C"
+else
+  LABEL="°F"
+fi
+
+# Final JSON output for Waybar
+echo "{\"text\": \"${ICON} ${TEMP}${LABEL}\", \"tooltip\": \"${DESC}\"}"

kitty/kitty.conf

@@ -18,7 +18,7 @@ window_padding_width 5
 hide_window_decorations no
 
 # Display Server
-linux_display_server x11
+linux_display_server wayland
 
 # Trail
 cursor_trail 10
@@ -33,7 +33,7 @@ cursor_trail_start_threshold 1
 include Catppuccin-Mocha.conf
 # END_KITTY_THEME
 
-
+shell fish
 
 # BEGIN_KITTY_FONTS
 font_family      family='JetBrains Mono' postscript_name=JetBrainsMono-Regular

logiops/logid.cfg

@@ -1,91 +1,92 @@
 devices: (
 {
-    name: "MX Master 3S";
+  name: "MX Master 3S";
-    smartshift:
+  smartshift:
-    {
+  {
-        on: true;
+    on: true;
-        threshold: 15;
+    threshold: 15;
-    };
+  };
-    hiresscroll:
+  hiresscroll:
-    // dpi: 1000;
+  // dpi: 1000;
-    {
+  {
-        hires: false;
+    hires: false;
-        invert: false;
+    invert: false;
-        target: true;
+    target: true;
-        up: {
+    up: {
-            mode: "Axis";
+      mode: "Axis";
-            axis: "REL_WHEEL";
+      axis: "REL_WHEEL";
-            axis_multiplier: 2.0;
+      axis_multiplier: 2.0;
-        },
+    },
-        down: {
+    down: {
-            mode: "Axis";
+      mode: "Axis";
-            axis: "REL_WHEEL";
+      axis: "REL_WHEEL";
-            axis_multiplier: -2.0;
+      axis_multiplier: -2.0;
-        }
-    };
-    thumbwheel: {
-        invert: true;
     }
+  };
+  thumbwheel: {
+    invert: true;
+  }
 
-    buttons: (
+  buttons: (
-		{ // thumb button
+    { 
-		cid: 0xc3; action = 
+      // thumb button
-			{
+      cid: 0xc3; action = 
-                type: "Gestures";
+        {
-                gestures: (
+          type: "Gestures";
-                    {
+          gestures: (
-                        direction: "UP";
+            {
-                        mode: "OnFewPixels";
+              direction: "UP";
-                        pixels: 200;
+              mode: "OnFewPixels";
-                        action =
+              pixels: 200;
-                        {
+              action =
-                            type: "Keypress";
+              {
-                            keys: ["KEY_LEFTCTRL", "KEY_F2"];
+                  type: "Keypress";
-                        };
+                  keys: ["KEY_LEFTCTRL", "KEY_F2"];
-                    },
+              };
-                    {
+            },
-                        direction: "DOWN";
+            {
-                        mode: "OnFewPixels";
+              direction: "DOWN";
-                        pixels: 200;
+              mode: "OnFewPixels";
-                        action =
+              pixels: 200;
-                        {
+              action =
-                            type: "Keypress";
+              {
-                            keys: ["KEY_LEFTCTRL", "KEY_F1"];
+                  type: "Keypress";
-                        };
+                  keys: ["KEY_LEFTCTRL", "KEY_F1"];
-                    },
+              };
-                    {
+            },
-                        direction: "left";
+            {
-                        mode: "OnRelease";
+              direction: "left";
-			action = {
+              mode: "OnRelease";
-		            type: "Keypress";
+
-			    keys: ["KEY_LEFTCTRL", "KEY_LEFTALT", "KEY_RIGHT"];
+              action = {
-			}
+                type: "Keypress";
-                    },
+                keys: ["KEY_LEFTCTRL", "KEY_LEFTALT", "KEY_RIGHT"];
-                    {
+              }
-                        direction: "right";
+            },
-                        mode: "OnRelease";
+            {
-			action = {
+              direction: "right";
-		            type: "Keypress";
+              mode: "OnRelease";
-			    keys: ["KEY_LEFTCTRL", "KEY_LEFTALT", "KEY_LEFT"];
+              action = {
-			}
+                type: "Keypress";
-                    },
+                keys: ["KEY_LEFTCTRL", "KEY_LEFTALT", "KEY_LEFT"];
-                    {
+              }
-                        direction: "None";
+            },
-                        mode: "OnRelease";
+            {
-                        action =
+              direction: "None";
-                 		{
+              mode: "OnRelease";
-                            type: "Keypress";
+              action = {
-                            keys: ["KEY_LEFTMETA"];
+                type: "Keypress";
-                        };
+                keys: ["KEY_LEFTMETA"];
-                    },
+              }
-                    {
+            },
-                        direction: "LEFT";
+            {
-                        mode: "NoPress";
+              direction: "LEFT";
-                    }
+              mode: "NoPress";
-                );
+            }
-            };
+          );
-        }
+        };
+      }
         
-	);
+    );
-}
+  }
 );

skhd/skhdrc

@@ -57,3 +57,7 @@ alt + shift - 0 : yabai -m window --space 10
 # Toggle pseudo scratchpad window: float, sticky, and center it on grid
 alt - p : yabai -m window --toggle sticky --toggle float --grid 4:4:1:1:2:2
 
+lalt -  return : open -a kitty
+lalt - b : open -a "Zen" --new
+lalt - e : open -a "Finder"
+lalt - w : skhd -k "cmd - w"

swww/config

@@ -0,0 +1,5 @@
+transition-type = grow
+transition-duration = 1.2
+transition-fps = 60
+transition-angle = 30
+transition-step = 90

waybar/config

@@ -1,16 +0,0 @@
-{
-    "layer": "top",
-    "modules-left": ["hyprland/workspaces"],
-    "modules-center": ["hyprland/window"],
-    "modules-right": ["battery", "clock"],
-    "hyprland/window": {
-        "max-length": 50
-    },
-    "battery": {
-        "format": "{capacity}% {icon}",
-        "format-icons": ["", "", "", "", ""]
-    },
-    "clock": {
-        "format-alt": "{:%a, %d. %b  %H:%M}"
-    }
-}

waybar/config.jsonc

@@ -0,0 +1,195 @@
+{
+  "layer": "bottom",
+  "position": "top",
+  "height": 30,
+  "spacing": 2,
+  "exclusive": true,
+  "gtk-layer-shell": true,
+  "passthrough": false,
+  "fixed-center": true,
+  "modules-left": [
+    "hyprland/workspaces",
+    "hyprland/window"
+  ],
+  "modules-right": [
+    "cpu",
+    "memory",
+    "pulseaudio",
+    "clock",
+    "clock#simpleclock",
+    "custom/weather",
+    "custom/tailscale",
+    "network",
+    "battery",
+    "tray",
+    "custom/notification",
+    "custom/power"
+  ],
+  "mpris": {
+    "format": "{cover_art}  {artist} - {title}",
+    "icon-size": 20,
+    "max-length": 40
+  },
+  "hyprland/workspaces": {
+    "on-click": "activate",
+    "format": "{windows}",
+    "all-outputs": true,
+    "disable-scroll": false,
+    "active-only": false,
+    "window-rewrite": {
+      "class<*>": "󰘔 ",
+      "class<firefox>": "󰈹 ",
+      "class<app.zen_browser.zen>": "󰖟 ",
+      "class<kitty>": " ",
+      "class<com.seafile.seafile-applet>": "󰅟 ",
+      "class<org.gnome.Nautilus>": " ",
+      "class<org.gnome.Software>": " ",
+      "class<chromium-browser>": " ",
+      "class<chrome-web.telegram.org__-Default>": " ",
+      "class<chrome-music.youtube.com__-Default>": " "
+    },
+    "window-rewrite-default": " "
+  },
+  "hyprland/window": {
+    "format": "{title}",
+    "icon": true,
+    "icon-size": 22,
+    "seperate-outputs": true,
+    "rewrite": {
+      "": "   Empty Workspace"
+    }
+  },
+  "tray": {
+    "show-passive-items": true,
+    "spacing": 10,
+  },
+  "clock#simpleclock": {
+    "tooltip": false,
+    "format": "  {:%H:%M}",
+  },
+  "clock": {
+    "format": "  {:L%a %d %b}",
+    "calendar": {
+      "format": {
+        "days": "<span weight='normal'>{}</span>",
+        "months": "<span color='#cdd6f4'><b>{}</b></span>",
+        "today": "<span color='#f38ba8' weight='700'><u>{}</u></span>",
+        "weekdays": "<span color='#f9e2af'><b>{}</b></span>",
+        "weeks": "<span color='#a6e3a1'><b>W{}</b></span>",
+      },
+      "mode": "month",
+      "mode-mon-col": 1,
+      "on-scroll": 1,
+    },
+    "tooltip-format": "<span color='#cdd6f4' font='Lexend 16'><tt><small>{calendar}</small></tt></span>",
+    "on-click": "gnome-calendar"
+  },
+  "cpu": {
+    "format": "  {usage}%",
+    "tooltip": true,
+    "interval": 1,
+    "on-click": "kitty btop"
+  },
+  "memory": {
+    "format": "  {used:0.1f}Gi",
+    "on-click": "kitty btop"
+  },
+  "pulseaudio": {
+    "format": "{icon} {volume}%",
+    "format-muted": "  muted",
+    "format-icons": {
+      "headphone": " ",
+      "default": [
+        " ",
+        " ",
+        " "
+      ]
+    },
+    "on-click": "pavucontrol"
+  },
+  "battery": {
+    "format": "{icon} {capacity}%",
+    "format-charging": "󱐋{icon} {capacity}%",
+    "format-plugged": "󱐋{icon} {capacity}%",
+    "format-icons": [
+      "󰂎",
+      "󰁺",
+      "󰁻",
+      "󰁼",
+      "󰁽",
+      "󰁾",
+      "󰁿",
+      "󰂀"
+    ],
+    "states": {
+      "critical": 15,
+      "warning": 30
+    },
+    "events": {
+      "on-discharging-critical": "notify-send -u critical 'Low Battery'"
+    }
+  },
+  "custom/sep": {
+    "format": "|",
+    "tooltip": false
+  },
+  "custom/power": {
+    "tooltip": false,
+    "on-click": "wlogout -p layer-shell &",
+    "format": "⏻"
+  },
+  "custom/nowplaying": {
+    "exec": "~/.config/waybar/scripts/nowplaying.sh",
+    "interval": 2,
+    "return-type": "json",
+    "on-click": "playerctl play-pause"
+  },
+  "custom/notification": {
+    "escape": true,
+    "exec": "swaync-client -swb",
+    "exec-if": "which swaync-client",
+    "format": "{icon}",
+    "format-icons": {
+      "none": "󰅺",
+      "notification": "󰡟",
+      "dnd-notification": "󰂛",
+      "": "󱏬",
+      "inhibited": "󰂛"
+    },
+    "on-click": "sleep 0.1 && swaync-client -t -sw",
+    "return-type": "json",
+    "tooltip": false
+  },
+  "custom/weather": {
+    "format": "{}",
+    "interval": 600,
+    "exec": "~/.config/hypr/scripts/weather.sh", // or your dotfiles folder if you use stow
+    "return-type": "json",
+    "on-click": "gnome-weather"
+  },
+  "custom/tailscale": {
+    "exec": "~/.config/waybar/scripts/tailscale.sh",
+    "interval": 5,
+    "return-type": "json",
+    "on-click": "~/.config/waybar/scripts/tailscale-toggle.sh",
+    "tooltip": true
+  },
+  "network": {
+    "interface": "wlp1s0",
+    "format": "",
+    "format-icons": [
+      "󰤟 ",
+      "󰤢 ",
+      "󰤥 ",
+      "󰤨 "
+    ],
+    "format-wifi": "{icon} {essid}",
+    "format-ethernet": "󰈀  Ethernet",
+    "format-disconnected": "󰤮  Disconnected",
+    "tooltip-format": "{ifname}",
+    "tooltip-format-wifi": "{essid} ({signalStrength}%)",
+    "tooltip-format-ethernet": "{ifname}",
+    "tooltip-format-disconnected": "Disconnected",
+    "max-length": 50
+  }
+}

waybar/scripts/nowplaying.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+CACHE="$HOME/.cache/waybar-cover.jpg"
+TMP="$HOME/.cache/waybar-cover.tmp.jpg"
+
+status=$(playerctl status 2>/dev/null)
+
+if [ "$status" = "Playing" ]; then
+  artist=$(playerctl metadata artist)
+  title=$(playerctl metadata title)
+  url=$(playerctl metadata mpris:artUrl)
+
+  if [[ "$url" == file://* ]]; then
+    cp "${url#file://}" "$TMP"
+  else
+    curl -sL "$url" -o "$TMP"
+  fi
+
+  mv -f "$TMP" "$CACHE"
+
+  echo "{\"text\": \"$artist - $title\", \"tooltip\": \"$artist - $title\", \"class\": \"playing\", \"alt\": \"$CACHE\"}"
+else
+  echo "{\"text\": \"󰐎 \", \"class\": \"stopped\"}"
+fi

waybar/scripts/tailscale-toggle.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+if tailscale status --json 2>/dev/null | grep -q '"BackendState": "Running"'; then
+  tailscale down
+else
+  tailscale up
+fi

waybar/scripts/tailscale.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+if tailscale status --json 2>/dev/null | grep -q '"BackendState": "Running"'; then
+  echo '{"text":"󰛳  ","class":"connected","tooltip":"Tailscale Connected"}'
+else
+  echo '{"text":"󰛳  ","class":"disconnected","tooltip":"Tailscale Disconnected"}'
+fi

waybar/style.css

@@ -0,0 +1,165 @@
+@define-color bg #1e1e2e;
+@define-color accent #b4befe;
+
+* {
+  min-height: 0;
+  min-width: 0;
+  font-family: "Lexend", "JetBrainsMono Nerd Font";
+  font-size: 13px;
+  font-weight: 400;
+}
+
+#workspaces {
+  background: transparent;
+}
+
+window#waybar {
+  min-height: 0;
+  background: transparent;
+}
+
+#window {
+  font-weight: 700;
+}
+
+#workspaces button {
+  padding-left: 5px;
+  padding-right: 0;
+  margin-top: 3px;
+  padding-top: 0;
+  padding-bottom: 0;
+  border: 0;
+  margin-left: 4px;
+  margin-right: 0;
+
+  min-height: 10px;
+  min-width: 24px;
+
+  border-radius: 6px;
+  background: alpha(@bg, 0.3);
+
+  transition: 
+    all 180ms cubic-bezier(.4,0,.2,1),
+    color 800ms cubic-bezier(.4, 0, .2, 1);
+
+  opacity: 0.3;
+}
+
+#workspaces button label {
+  font-size: 18px;
+  letter-spacing: -3px;
+}
+
+#workspaces button:hover {
+  background: rgba(255,255,255,0.45);
+  opacity: 0.4;
+}
+
+#workspaces button.active {
+  min-width: 34px;
+  background: white;
+  background: alpha(@bg,0.3);
+  color: white;
+  border: 1px solid alpha(white, 0.7);
+  opacity: 1.0;
+}
+
+#workspaces button.visible {
+  background: alpha(@bg,0.3);
+}
+
+#workspaces button.urgent {
+  background: #ff5f5f;
+}
+
+#clock,
+#pulseaudio,
+#custom-nowplaying,
+#custom-logo,
+#custom-power,
+#custom-spotify,
+#custom-notification,
+#custom-tailscale,
+#custom-weather,
+#cpu,
+#tray,
+#memory,
+#battery,
+#network,
+#window,
+#mpris {
+  padding: 0.1rem 0.6rem;
+  border-radius: 6px;
+  background-color: alpha(@bg, 0.3);
+  margin-top: 3px;
+  margin-left: 3px;
+  margin-right: 3px;
+}
+
+#custom-nowplaying {
+    padding-left: 40px;
+    background-size: 30px 30px;
+    background-repeat: no-repeat;
+    background-position: left center;
+    background-image: url('/home/stereov/.cache/nowplaying-cover.jpg')
+}
+
+#mpris.playing {
+  color: #a6e3a1;
+}
+
+#mpris.paused {
+  color: #9399b2;
+}
+
+#custom-sep {
+  padding: 0px;
+  color: #585b70;
+}
+/*
+#cpu {
+  color: #94e2d5;
+}
+
+#memory {
+  color: #cba6f7;
+}
+
+#clock {
+  color: #74c7ec;
+}
+
+#clock.simpleclock {
+  color: #89b4fa;
+}
+
+
+#pulseaudio {
+  color: #b4befe;
+}
+
+#pulseaudio.muted {
+  color: #a6adc8;
+}
+
+#custom-logo {
+  color: #89b4fa;
+}
+
+#custom-power {
+  color: #f38ba8;
+}
+
+#battery {
+  color: #94e2d5;
+}
+
+#battery.critical {
+  color: red;
+}
+
+tooltip {
+  background-color: #181825;
+  border: 2px solid #89b4fa;
+}
+*/

wlogout/layout

@@ -0,0 +1,36 @@
+{
+    "label" : "lock",
+    "action" : "hyprlock",
+    "text" : "Lock",
+    "keybind" : "l"
+}
+{
+    "label" : "logout",
+    "action" : "hyprctl dispatch exit",
+    "text" : "Logout",
+    "keybind" : "e"
+}
+{
+    "label" : "suspend",
+    "action" : "systemctl suspend",
+    "text" : "Suspend",
+    "keybind" : "u"
+}
+{
+    "label" : "hibernate",
+    "action" : "systemctl hibernate",
+    "text" : "Hibernate",
+    "keybind" : "h"
+}
+{
+    "label" : "shutdown",
+    "action" : "systemctl poweroff",
+    "text" : "Shutdown",
+    "keybind" : "s"
+}
+{
+    "label" : "reboot",
+    "action" : "systemctl reboot",
+    "text" : "Reboot",
+    "keybind" : "r"
+}

wlogout/style.css

@@ -0,0 +1,43 @@
+window {
+  font-family: "Lexend";
+  font-size: 12pt;
+  color: #cdd6f4;
+  background-color: rgba(30, 30, 46, 0.9);
+}
+
+button {
+  background-repeat: no-repeat;
+  background-position: center;
+  background-size: 25%;
+  border-style: solid;
+  border-width: 3px;
+  background-color: rgba(12, 12, 12, 0.3);
+  border-color: #313244;
+  margin: 5px;
+  border-radius: 20px;
+  transition: all 0.3s ease-in-out;
+}
+
+#lock {
+  background-image: image(url("icons/lock.png"));
+}
+
+#logout {
+  background-image: image(url("icons/logout.png"));
+}
+
+#suspend {
+  background-image: image(url("icons/suspend.png"));
+}
+
+#hibernate {
+  background-image: image(url("icons/hibernate.png"));
+}
+
+#reboot {
+  background-image: image(url("icons/reboot.png"));
+}
+
+#shutdown {
+  background-image: image(url("icons/shutdown.png"));
+}

wofi/style.css

@@ -0,0 +1,47 @@
+/* The name of the window itself */
+#window {
+  background-color: rgba(24, 24, 24, 0.8);
+  box-shadow: 0 10px 15px -3px rgba(0, 0, 0, 0.1), 0 4px 6px -4px rgba(0, 0, 0, 0.1);
+  border-radius: 1rem;
+  font-size: 1.2rem;
+  /* The name of the box that contains everything */
+}
+#window #outer-box {
+  /* The name of the search bar */
+  /* The name of the scrolled window containing all of the entries */
+}
+#window #outer-box #input {
+  background-color: rgba(24, 24, 24, 0.8);
+  color: #f2f2f2;
+  border: none;
+  border-bottom: 1px solid rgba(24, 24, 24, 0.2);
+  padding: 0.8rem 1rem;
+  font-size: 1.5rem;
+  border-radius: 1rem 1rem 0 0;
+}
+#window #outer-box #input:focus, #window #outer-box #input:focus-visible, #window #outer-box #input:active {
+  border: none;
+  outline: 2px solid transparent;
+  outline-offset: 2px;
+}
+#window #outer-box #scroll {
+  /* The name of the box containing all of the entries */
+}
+#window #outer-box #scroll #inner-box {
+  /* The name of all entries */
+  /* The name of all boxes shown when expanding  */
+  /* entries with multiple actions */
+}
+#window #outer-box #scroll #inner-box #entry {
+  color: #fff;
+  background-color: rgba(24, 24, 24, 0.6);
+}
+#window #outer-box #scroll #inner-box #entry #img {
+  width: 1rem;
+  margin-right: 0.5rem;
+}
+#window #outer-box #scroll #inner-box #entry:selected {
+  color: #fff;
+  background-color: rgba(255, 255, 255, 0.6);
+  outline: none;
+}

wofi/style.scss

@@ -0,0 +1,58 @@
+/* The name of the window itself */
+#window {
+	background-color: rgba(24,24,24,0.6);
+	box-shadow: 0 10px 15px -3px rgb(0 0 0 / 0.1), 0 4px 6px -4px rgb(0 0 0 / 0.1);
+	border-radius: 1rem;
+	font-size: 1.2rem;
+	/* The name of the box that contains everything */
+	#outer-box {
+		/* The name of the search bar */
+		#input {
+			background-color: rgba(24,24,24,0.8);
+			color: #f2f2f2;
+			border: none;
+			border-bottom: 1px solid rgba(24,24,24,0.2);
+			padding: 0.8rem 1rem;
+			font-size: 1.5rem;
+			border-radius: 1rem 1rem 0 0;
+			&:focus, &:focus-visible, &:active {
+				border: none;
+				outline: 2px solid transparent;
+				outline-offset: 2px;
+			}
+		}
+
+		/* The name of the scrolled window containing all of the entries */
+		#scroll {
+			/* The name of the box containing all of the entries */
+			#inner-box {
+				/* The name of all entries */
+				#entry {
+					color: #fff; 
+					background-color: rgba(24,24,24,0.1);
+					padding: 0.6rem 1rem;
+
+					/* The name of all images in entries displayed in image mode */
+					#img {
+						width: 1rem;
+						margin-right: 0.5rem;
+					}
+					/* The name of all the text in entries */
+					#text {}
+					&:selected {
+						color: #fff; 
+						background-color: rgba(255,255,255,0.1);
+						outline: none;
+					}
+				}
+				/* The name of all boxes shown when expanding  */
+				/* entries with multiple actions */
+				#expander-box {
+				}
+			}
+		}
+	}
+}
+
+
+

yabai/yabairc

@@ -21,22 +21,35 @@ yabai -m rule --add title='^Archive Utility$' manage=off
 
 yabai -m rule --add app="^IntelliJ IDEA$" title="^Welcome to IntelliJ IDEA$" manage=off
 yabai -m rule --add app="^WebStorm$" title="^Welcome to WebStorm$" manage=off
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Add File to Git$" manage=off
+jetbrains_dialogs=(
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Delete$" manage=off
+  "^Add File to Git$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Push Commits" manage=off
+  "^Delete$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Update Project$" manage=off
+  "^Push Commits"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^New Project$" manage=off
+  "^Update Project$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Clone Repository$" manage=off
+  "^New Project$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Project Structure$" manage=off
+  "^Clone Repository$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Settings$" manage=off
+  "^Project Structure$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Run/Debug Configurations$" manage=off
+  "^Settings$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Data Sources and Drivers$" manage=off
+  "^Run/Debug Configurations$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Choose Plugins to Install or Enable$" manage=off
+  "^Data Sources and Drivers$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Create New Branch$" manage=off
+  "^Choose Plugins to Install or Enable$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Copy$" manage=off
+  "^Create New Branch$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Rename$" manage=off
+  "^Copy$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Rename Branch" manage=off
+  "^Rename$"
-yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="^Rollback Changes$"" manage=off
+  "^Rename Branch"
+  "^Rollback Changes$"
+  "^Copy Files/Directory$"
+  "^Choose Package$"
+  "^Move Package$"
+  "^Move$"
+  "^Git Editor$"
+  "^Create New Tag"
+)
+
+for title in "${jetbrains_dialogs[@]}"; do
+  yabai -m rule --add app="^(IntelliJ IDEA|WebStorm)$" title="$title" manage=off
+done
+
 # float settings windows
 yabai -m rule --add title='Settings$' manage=off
 
@@ -67,3 +80,4 @@ yabai -m signal --add event=application_activated action="zsh ~/.config/yabai/ap
 yabai -m signal --add event=window_created action="zsh ~/.config/yabai/window-created.zsh"
 
 echo "yabai configuration loaded.."
+